# Karamba3D v3

## English 英文

- [Welcome to Karamba3D](https://manual.karamba3d.com/readme.md): The official guide to using Karamba3D v3. The latest version is 3.1.4.
- [New in Karamba3D 3.1](https://manual.karamba3d.com/new-in-karamba3d-3.1.md)
- [1.1 Installation](https://manual.karamba3d.com/1-introduction/a.2-installation.md)
- [1.2 Licenses](https://manual.karamba3d.com/1-introduction/1.2-licenses.md)
- [1.2.1 Cloud Licenses](https://manual.karamba3d.com/1-introduction/1.2-licenses/1.2.1-cloud-licenses.md)
- [1.2.2 Network Licenses](https://manual.karamba3d.com/1-introduction/1.2-licenses/1.2.2-network-licenses.md)
- [1.2.3 Temporary Licenses](https://manual.karamba3d.com/1-introduction/1.2-licenses/1.2.3-temporary-licenses.md)
- [1.2.4 Standalone Licenses](https://manual.karamba3d.com/1-introduction/1.2-licenses/1.2.4-standalone-licenses.md)
- [2 Getting Started](https://manual.karamba3d.com/2-getting-started/2-getting-started-1.md)
- [2.1 Karamba3D Entities](https://manual.karamba3d.com/2-getting-started/2-getting-started-1/karamba3d-entities.md)
- [2.2 Setting up a Structural Analysis](https://manual.karamba3d.com/2-getting-started/2-getting-started-1/setting-up-a-structural-analysis.md)
- [2.2.1 Define the Model Elements](https://manual.karamba3d.com/2-getting-started/2-getting-started-1/setting-up-a-structural-analysis/2.2.1-define-the-model-elements.md)
- [2.2.2 View the Model](https://manual.karamba3d.com/2-getting-started/2-getting-started-1/setting-up-a-structural-analysis/2.2.2-view-the-model.md)
- [2.2.3 Add Supports](https://manual.karamba3d.com/2-getting-started/2-getting-started-1/setting-up-a-structural-analysis/2.2.3-add-supports.md)
- [2.2.4 Define Loads](https://manual.karamba3d.com/2-getting-started/2-getting-started-1/setting-up-a-structural-analysis/2.2.4-define-loads.md)
- [2.2.5 Choose an Algorithm](https://manual.karamba3d.com/2-getting-started/2-getting-started-1/setting-up-a-structural-analysis/2.2.5-choose-an-algorithm.md)
- [2.2.6 Provide Cross Sections](https://manual.karamba3d.com/2-getting-started/2-getting-started-1/setting-up-a-structural-analysis/2.2.6-provide-cross-sections.md)
- [2.2.7 Specify Materials](https://manual.karamba3d.com/2-getting-started/2-getting-started-1/setting-up-a-structural-analysis/2.2.7-specify-materials.md)
- [2.2.8 Retrieve Results](https://manual.karamba3d.com/2-getting-started/2-getting-started-1/setting-up-a-structural-analysis/2.2.8-retrieve-results.md)
- [2.3 The Karamba3D Menu](https://manual.karamba3d.com/2-getting-started/2-getting-started-1/2.3-the-karamba3d-menu.md)
- [2.4 User Settings](https://manual.karamba3d.com/2-getting-started/2-getting-started-1/2.4-user-settings.md)
- [2.5 Physical Units](https://manual.karamba3d.com/2-getting-started/2-getting-started-1/2.3-physical-units.md)
- [2.6 Asynchronous Execution of Karamba3D Components](https://manual.karamba3d.com/2-getting-started/2-getting-started-1/2.6-asynchronous-execution-of-karamba3d-components.md)
- [2.7 Naming and Selection of Elements](https://manual.karamba3d.com/2-getting-started/2-getting-started-1/2.7-naming-and-selection-of-elements.md)
- [2.8 Quick Component Reference](https://manual.karamba3d.com/2-getting-started/2-getting-started-1/untitled.md)
- [3.0 Settings](https://manual.karamba3d.com/3-in-depth-component-reference/3.0-settings.md)
- [3.0.1 License](https://manual.karamba3d.com/3-in-depth-component-reference/3.0-settings/3.0.2-license.md)
- [3.1 Model](https://manual.karamba3d.com/3-in-depth-component-reference/3.1-model.md)
- [3.1.1 Assemble Model](https://manual.karamba3d.com/3-in-depth-component-reference/3.1-model/3.1.1-assemble-model.md)
- [3.1.2 Disassemble Model](https://manual.karamba3d.com/3-in-depth-component-reference/3.1-model/3.1.2-disassemble-model.md)
- [3.1.3: Modify Model](https://manual.karamba3d.com/3-in-depth-component-reference/3.1-model/3.1.3-modify-model.md)
- [3.1.4: Connected Parts](https://manual.karamba3d.com/3-in-depth-component-reference/3.1-model/3.1.4-connected-parts.md)
- [3.1.5: Activate Element](https://manual.karamba3d.com/3-in-depth-component-reference/3.1-model/3.1.5-activate-element.md)
- [3.1.6 Create Linear Element](https://manual.karamba3d.com/3-in-depth-component-reference/3.1-model/3.1.6-create-linear-element.md)
- [3.1.6.1 Line to Beam](https://manual.karamba3d.com/3-in-depth-component-reference/3.1-model/3.1.6-create-linear-element/3.1.6-line-to-beam.md)
- [3.1.6.2 Line to Truss](https://manual.karamba3d.com/3-in-depth-component-reference/3.1-model/3.1.6-create-linear-element/3.1.6-line-to-beam-1.md)
- [3.1.6.3 Connectivity to Beam](https://manual.karamba3d.com/3-in-depth-component-reference/3.1-model/3.1.6-create-linear-element/3.1.7-connectivity-to-beam.md)
- [3.1.6.4: Index to Beam](https://manual.karamba3d.com/3-in-depth-component-reference/3.1-model/3.1.6-create-linear-element/3.1.8-index-to-beam.md)
- [3.1.7 Create Surface Element](https://manual.karamba3d.com/3-in-depth-component-reference/3.1-model/3.1.7-create-surface-element.md)
- [3.1.7.1: Mesh to Shell](https://manual.karamba3d.com/3-in-depth-component-reference/3.1-model/3.1.7-create-surface-element/3.1.9-mesh-to-shell.md)
- [3.1.7.2: Mesh to Membrane](https://manual.karamba3d.com/3-in-depth-component-reference/3.1-model/3.1.7-create-surface-element/3.1.7.2-mesh-to-membrane.md)
- [3.1.8: Modify Element](https://manual.karamba3d.com/3-in-depth-component-reference/3.1-model/3.1.10-modify-element.md)
- [3.1.9: Point-Mass](https://manual.karamba3d.com/3-in-depth-component-reference/3.1-model/3.1.11-point-mass.md)
- [3.1.10: Disassemble Element](https://manual.karamba3d.com/3-in-depth-component-reference/3.1-model/3.1.12-disassemble-element.md)
- [3.1.11: Make Element-Set](https://manual.karamba3d.com/3-in-depth-component-reference/3.1-model/3.1.13-make-beam-set.md)
- [3.1.12: Orientate Element](https://manual.karamba3d.com/3-in-depth-component-reference/3.1-model/3.1.14-orientate-element.md)
- [3.1.13: Dispatch Elements](https://manual.karamba3d.com/3-in-depth-component-reference/3.1-model/3.1.15-select-beam.md)
- [3.1.14: Select Elements](https://manual.karamba3d.com/3-in-depth-component-reference/3.1-model/3.1.16-select-elements.md)
- [3.1.15: Support](https://manual.karamba3d.com/3-in-depth-component-reference/3.1-model/3.1.16-support.md)
- [3.1.16: Support Agent](https://manual.karamba3d.com/3-in-depth-component-reference/3.1-model/3.1.16-support-agent.md)
- [3.1.17: Disassemble Support](https://manual.karamba3d.com/3-in-depth-component-reference/3.1-model/3.1.17-disassemble-support.md)
- [3.2: Load](https://manual.karamba3d.com/3-in-depth-component-reference/3.2-load.md)
- [3.2.1: General Loads](https://manual.karamba3d.com/3-in-depth-component-reference/3.2-load/3.2.1-loads.md)
- [3.2.2: Beam Loads](https://manual.karamba3d.com/3-in-depth-component-reference/3.2-load/3.2.2-beam-loads.md)
- [3.2.3: Disassemble Mesh Load](https://manual.karamba3d.com/3-in-depth-component-reference/3.2-load/3.2.2-disassemble-mesh-load.md)
- [3.2.4 Load-Case-Combinations](https://manual.karamba3d.com/3-in-depth-component-reference/3.2-load/3.2.4-load-case-combinations.md)
- [3.2.5.1 Load-Case-Combinator](https://manual.karamba3d.com/3-in-depth-component-reference/3.2-load/3.2.4-load-case-combinations/3.2.5.1-load-case-combinator.md)
- [3.2.5.2 Disassemble Load-Case-Combinaton](https://manual.karamba3d.com/3-in-depth-component-reference/3.2-load/3.2.4-load-case-combinations/3.2.5.2-disassemble-load-case-combinaton.md)
- [3.2.5.3 Load-Case-Combination Settings](https://manual.karamba3d.com/3-in-depth-component-reference/3.2-load/3.2.4-load-case-combinations/3.2.5.3-load-case-combination-settings.md)
- [3.2.5.4 Load-Case Properties](https://manual.karamba3d.com/3-in-depth-component-reference/3.2-load/3.2.4-load-case-combinations/3.2.5.4-load-case-properties.md)
- [3.3: Cross Section](https://manual.karamba3d.com/3-in-depth-component-reference/3.3-cross-section.md)
- [3.3.1: Beam Cross Sections](https://manual.karamba3d.com/3-in-depth-component-reference/3.3-cross-section/3.3.1-beam-cross-sections.md)
- [3.3.2: Shell Cross Sections](https://manual.karamba3d.com/3-in-depth-component-reference/3.3-cross-section/3.3.2-shell-cross-sections.md)
- [3.3.3: Spring Cross Sections](https://manual.karamba3d.com/3-in-depth-component-reference/3.3-cross-section/3.3.3-spring-cross-sections.md)
- [3.3.4: Disassemble Cross Section](https://manual.karamba3d.com/3-in-depth-component-reference/3.3-cross-section/3.3.4-disassemble-cross-section.md)
- [3.3.5: Eccentricity on Beam and Cross Section](https://manual.karamba3d.com/3-in-depth-component-reference/3.3-cross-section/3.3.7-eccentricity-on-beam-eccentricity-on-cross-section.md)
- [3.3.6: Modify Cross Section](https://manual.karamba3d.com/3-in-depth-component-reference/3.3-cross-section/3.3.8-modify-cross-section.md)
- [3.3.7: Cross Section Range Selector](https://manual.karamba3d.com/3-in-depth-component-reference/3.3-cross-section/3.3.9-cross-section-range-selector.md)
- [3.3.8: Cross Section Selector](https://manual.karamba3d.com/3-in-depth-component-reference/3.3-cross-section/3.3.10-cross-section-selector.md)
- [3.3.9: Cross Section Matcher](https://manual.karamba3d.com/3-in-depth-component-reference/3.3-cross-section/3.3.11-cross-section-matcher.md)
- [3.3.10: Generate Cross Section Table](https://manual.karamba3d.com/3-in-depth-component-reference/3.3-cross-section/3.3.12-generate-cross-section-table.md)
- [3.3.11: Read Cross Section Table from File](https://manual.karamba3d.com/3-in-depth-component-reference/3.3-cross-section/3.3.13-read-cross-section-table-from-file.md)
- [3.4: Joint](https://manual.karamba3d.com/3-in-depth-component-reference/3.4-joint.md)
- [3.4.1: Beam-Joints](https://manual.karamba3d.com/3-in-depth-component-reference/3.4-joint/3.3.6-beam-joints.md)
- [3.4.2: Beam-Joint Agent](https://manual.karamba3d.com/3-in-depth-component-reference/3.4-joint/3.3.5-beam-joint-agent.md)
- [3.4.3: Line-Joint](https://manual.karamba3d.com/3-in-depth-component-reference/3.4-joint/3.4.3-line-joint.md)
- [3.5: Material](https://manual.karamba3d.com/3-in-depth-component-reference/3.4-material.md)
- [3.5.1: Material Properties](https://manual.karamba3d.com/3-in-depth-component-reference/3.4-material/3.4.1-material-properties.md)
- [3.5.2: Material Selection](https://manual.karamba3d.com/3-in-depth-component-reference/3.4-material/3.4.2-material-selection.md)
- [3.5.3: Read Material Table from File](https://manual.karamba3d.com/3-in-depth-component-reference/3.4-material/3.4.3-read-material-table-from-file.md)
- [3.5.4: Disassemble Material](https://manual.karamba3d.com/3-in-depth-component-reference/3.4-material/3.4.4-disassemble-material.md)
- [3.6: Algorithms](https://manual.karamba3d.com/3-in-depth-component-reference/3.5-algorithms.md)
- [3.6.1: Analyze](https://manual.karamba3d.com/3-in-depth-component-reference/3.5-algorithms/3.5.1-analyze.md)
- [3.6.2: AnalyzeThII](https://manual.karamba3d.com/3-in-depth-component-reference/3.5-algorithms/3.5.2-analyzethii.md)
- [3.6.3: Analyze Nonlinear WIP](https://manual.karamba3d.com/3-in-depth-component-reference/3.5-algorithms/3.5.3-analyze-nonlinear-wip.md)
- [3.6.4: Large Deformation Analysis](https://manual.karamba3d.com/3-in-depth-component-reference/3.5-algorithms/3.5.4-analyze-large-deformation.md)
- [3.6.5: Buckling Modes](https://manual.karamba3d.com/3-in-depth-component-reference/3.5-algorithms/3.5.5-buckling-modes.md)
- [3.6.6: Eigen Modes](https://manual.karamba3d.com/3-in-depth-component-reference/3.5-algorithms/3.5.6-eigen-modes.md)
- [3.6.7: Natural Vibrations](https://manual.karamba3d.com/3-in-depth-component-reference/3.5-algorithms/3.5.7-natural-vibrations.md)
- [3.6.8: Optimize Cross Section](https://manual.karamba3d.com/3-in-depth-component-reference/3.5-algorithms/3.5.8-optimize-cross-section.md)
- [3.6.9: BESO for Beams](https://manual.karamba3d.com/3-in-depth-component-reference/3.5-algorithms/3.5.9-beso-for-beams.md)
- [3.6.10: BESO for Shells](https://manual.karamba3d.com/3-in-depth-component-reference/3.5-algorithms/3.5.10-beso-for-shells.md)
- [3.6.11: Optimize Reinforcement](https://manual.karamba3d.com/3-in-depth-component-reference/3.5-algorithms/3.5.11-optimize-reinforcement.md)
- [3.6.12: Tension/Compression Eliminator](https://manual.karamba3d.com/3-in-depth-component-reference/3.5-algorithms/3.5.12-tension-compression-eliminator.md): This component was programmed by Robert Vierlinger
- [3.7 Results](https://manual.karamba3d.com/3-in-depth-component-reference/3.6-results.md)
- [3.7.1 General Results](https://manual.karamba3d.com/3-in-depth-component-reference/3.6-results/3.7.1-general-results.md)
- [3.7.1.1 ModelView](https://manual.karamba3d.com/3-in-depth-component-reference/3.6-results/3.7.1-general-results/3.6.1-modelview.md)
- [3.7.1.2 Result Selector](https://manual.karamba3d.com/3-in-depth-component-reference/3.6-results/3.7.1-general-results/3.7.1.2-result-selector.md)
- [3.7.1.3 Deformation-Energy](https://manual.karamba3d.com/3-in-depth-component-reference/3.6-results/3.7.1-general-results/3.6.2-deformation-energy.md)
- [3.7.1.4 Element Query](https://manual.karamba3d.com/3-in-depth-component-reference/3.6-results/3.7.1-general-results/3.7.3-element-query.md)
- [3.7.1.5 Nodal Displacements](https://manual.karamba3d.com/3-in-depth-component-reference/3.6-results/3.7.1-general-results/3.6.3-nodal-displacements.md)
- [3.7.1.6 Principal Strains Approximation](https://manual.karamba3d.com/3-in-depth-component-reference/3.6-results/3.7.1-general-results/3.6.4-principal-strains-approximation.md)
- [3.7.1.7 Reaction Forces](https://manual.karamba3d.com/3-in-depth-component-reference/3.6-results/3.7.1-general-results/3.6.5-reaction-forces.md)
- [3.7.1.8 Utilization of Elements](https://manual.karamba3d.com/3-in-depth-component-reference/3.6-results/3.7.1-general-results/3.6.6-utilization-of-elements.md)
- [3.7.1.9 ReactionView](https://manual.karamba3d.com/3-in-depth-component-reference/3.6-results/3.7.1-general-results/3.7.1.9-reactionview.md)
- [3.7.2 Results on Beams](https://manual.karamba3d.com/3-in-depth-component-reference/3.6-results/3.7.2-results-on-beams.md)
- [3.7.2.1 BeamView](https://manual.karamba3d.com/3-in-depth-component-reference/3.6-results/3.7.2-results-on-beams/3.6.7-beamview.md)
- [3.7.2.2 Beam Displacements](https://manual.karamba3d.com/3-in-depth-component-reference/3.6-results/3.7.2-results-on-beams/3.6.8-beam-displacements.md)
- [3.7.2.3 Beam Forces](https://manual.karamba3d.com/3-in-depth-component-reference/3.6-results/3.7.2-results-on-beams/3.6.9-beam-forces.md)
- [3.7.2.4 Node Forces](https://manual.karamba3d.com/3-in-depth-component-reference/3.6-results/3.7.2-results-on-beams/3.6.10-resultant-section-forces.md)
- [3.7.3 Results on Shells](https://manual.karamba3d.com/3-in-depth-component-reference/3.6-results/3.7.3-results-on-shells.md)
- [3.7.3.1 ShellView](https://manual.karamba3d.com/3-in-depth-component-reference/3.6-results/3.7.3-results-on-shells/3.6.11-shellview.md)
- [3.7.3.2 Line Results on Shells](https://manual.karamba3d.com/3-in-depth-component-reference/3.6-results/3.7.3-results-on-shells/3.6.12-line-results-on-shells.md)
- [3.7.3.3 Result Vectors on Shells](https://manual.karamba3d.com/3-in-depth-component-reference/3.6-results/3.7.3-results-on-shells/3.6.13-result-vectors-on-shells.md)
- [3.7.3.4 Shell Forces](https://manual.karamba3d.com/3-in-depth-component-reference/3.6-results/3.7.3-results-on-shells/3.6.14-shell-forces.md)
- [3.7.3.5 Shell Sections](https://manual.karamba3d.com/3-in-depth-component-reference/3.6-results/3.7.3-results-on-shells/3.6.15-shell-sections.md): The 'Shell-Section'-component lets you determine forces, stresses and displacements of a shell along arbitrary poly-lines.
- [3.7.4 Report](https://manual.karamba3d.com/3-in-depth-component-reference/3.6-results/3.7.4-report.md)
- [3.8 Export](https://manual.karamba3d.com/3-in-depth-component-reference/3.7-export.md)
- [3.8.1 Export Model to DStV](https://manual.karamba3d.com/3-in-depth-component-reference/3.7-export/3.7.1-export-model-to-dstv.md)
- [3.8.2 Json/Bson Export and Import](https://manual.karamba3d.com/3-in-depth-component-reference/3.7-export/3.8.2-json-bson-export-and-import.md)
- [3.8.3 Export Model to SAF](https://manual.karamba3d.com/3-in-depth-component-reference/3.7-export/3.8.3-export-model-to-saf.md)
- [3.8.4 Export/Import Model to and from Speckle (WIP)](https://manual.karamba3d.com/3-in-depth-component-reference/3.7-export/3.8.4-export-import-model-to-and-from-speckle-wip.md)
- [3.8.5 Export Model to ETABS (.e2k)](https://manual.karamba3d.com/3-in-depth-component-reference/3.7-export/3.8.5-export-model-to-etabs-.e2k.md)
- [3.8.6 Export Model to SAP2000 (.s2k)](https://manual.karamba3d.com/3-in-depth-component-reference/3.7-export/3.8.6-export-model-to-sap2000-.s2k.md)
- [3.9 Utilities](https://manual.karamba3d.com/3-in-depth-component-reference/3.8-utilities.md)
- [3.9.1: Mesh Breps](https://manual.karamba3d.com/3-in-depth-component-reference/3.8-utilities/3.8.1-mesh-breps.md): This component was programmed by Moritz Heimrath
- [3.9.2: Closest Points](https://manual.karamba3d.com/3-in-depth-component-reference/3.8-utilities/3.8.2-closest-points.md)
- [3.9.3: Closest Points Multi-dimensional](https://manual.karamba3d.com/3-in-depth-component-reference/3.8-utilities/3.8.3-closest-points-multi-dimensional.md)
- [3.9.4: Cull Curves](https://manual.karamba3d.com/3-in-depth-component-reference/3.8-utilities/3.8.4-cull-curves.md)
- [3.9.5: Detect Collisions](https://manual.karamba3d.com/3-in-depth-component-reference/3.8-utilities/3.8.5-detect-collisions.md)
- [3.9.6: Get Cells from Lines](https://manual.karamba3d.com/3-in-depth-component-reference/3.8-utilities/3.8.6-get-cells-from-lines.md)
- [3.9.7: Curve-Curve Intersection](https://manual.karamba3d.com/3-in-depth-component-reference/3.8-utilities/3.8.7-line-line-intersection.md)
- [3.9.8: Principal States Transformation](https://manual.karamba3d.com/3-in-depth-component-reference/3.8-utilities/3.8.8-principal-states-transformation.md)
- [3.9.9: Remove Duplicate Lines](https://manual.karamba3d.com/3-in-depth-component-reference/3.8-utilities/3.8.9-remove-duplicate-lines.md)
- [3.9.10: Remove Duplicate Points](https://manual.karamba3d.com/3-in-depth-component-reference/3.8-utilities/3.8.10-remove-duplicate-points.md)
- [3.9.11: Simplify Model](https://manual.karamba3d.com/3-in-depth-component-reference/3.8-utilities/3.8.11-simplify-model.md)
- [3.9.12: Element Felting](https://manual.karamba3d.com/3-in-depth-component-reference/3.8-utilities/3.8.12-element-felting.md)
- [3.9.13: Mapper](https://manual.karamba3d.com/3-in-depth-component-reference/3.8-utilities/3.8.13-mapper.md)
- [3.9.14: Interpolate Shape](https://manual.karamba3d.com/3-in-depth-component-reference/3.8-utilities/3.8.14-interpolate-shape.md)
- [3.9.15: Connecting Beams with Stitches](https://manual.karamba3d.com/3-in-depth-component-reference/3.8-utilities/3.8.15-connecting-beams-with-stitches.md)
- [3.9.16: User Iso-Lines and Stream-Lines](https://manual.karamba3d.com/3-in-depth-component-reference/3.8-utilities/3.8.16-user-iso-lines-and-stream-lines.md)
- [3.9.17: Cross Section Properties](https://manual.karamba3d.com/3-in-depth-component-reference/3.8-utilities/3.9.17-cross-section-properties.md)
- [3.9.18 Surface To Truss](https://manual.karamba3d.com/3-in-depth-component-reference/3.8-utilities/3.9.18-surface-to-truss.md)
- [3.9.19 Head-Up Display Legend](https://manual.karamba3d.com/3-in-depth-component-reference/3.8-utilities/3.9.19-head-up-display-legend.md)
- [3.9.20 Key Listener](https://manual.karamba3d.com/3-in-depth-component-reference/3.8-utilities/3.9.20-key-listener.md)
- [3.10 Parametric UI](https://manual.karamba3d.com/3-in-depth-component-reference/3.9-parametric-ui.md)
- [3.10.1: View-Components](https://manual.karamba3d.com/3-in-depth-component-reference/3.9-parametric-ui/3.9.1-view-components.md)
- [3.10.2: Rendered View](https://manual.karamba3d.com/3-in-depth-component-reference/3.9-parametric-ui/render-symbols.md)
- [4.1: Miscellaneous Questions and Problems](https://manual.karamba3d.com/troubleshooting/4.3.-miscellaneous-problems.md)
- [4.1.0: FAQ](https://manual.karamba3d.com/troubleshooting/4.3.-miscellaneous-problems/4.1.0-faq.md)
- [4.1.1: Installation Issues](https://manual.karamba3d.com/troubleshooting/4.3.-miscellaneous-problems/4.3.1-installation-issues.md)
- [4.1.2: Purchases](https://manual.karamba3d.com/troubleshooting/4.3.-miscellaneous-problems/4.1.2-purchases.md)
- [4.1.3: Licensing](https://manual.karamba3d.com/troubleshooting/4.3.-miscellaneous-problems/licensing.md)
- [4.1.4: Runtime Errors](https://manual.karamba3d.com/troubleshooting/4.3.-miscellaneous-problems/4.1.4-runtime-errors.md)
- [4.1.5: Definitions and Components](https://manual.karamba3d.com/troubleshooting/4.3.-miscellaneous-problems/4.1.5-definitions-and-components.md)
- [4.1.6: Default Program Settings](https://manual.karamba3d.com/troubleshooting/4.3.-miscellaneous-problems/4.1.6-changing-karamba.ini-file.md)
- [4.2: Support](https://manual.karamba3d.com/troubleshooting/4.2-karamba3d-does-not-work-for-unknown-reason.md)
- [A.1: Release Notes](https://manual.karamba3d.com/appendix/a.1-updates-and-bug-fixes.md)
- [Work in Progress Versions](https://manual.karamba3d.com/appendix/a.1-updates-and-bug-fixes/work-in-progress-versions.md)
- [Older Versions](https://manual.karamba3d.com/appendix/a.1-updates-and-bug-fixes/older-versions.md)
- [Version 2.2.0](https://manual.karamba3d.com/appendix/a.1-updates-and-bug-fixes/new-in-karamba3d-2.2.0.x.md)
- [Version 2.2.0 WIP](https://manual.karamba3d.com/appendix/a.1-updates-and-bug-fixes/version-2.2.0-wip.md)
- [Version 1.3.3](https://manual.karamba3d.com/appendix/a.1-updates-and-bug-fixes/version-1.3.3.md)
- [Version 1.3.2 build 190919](https://manual.karamba3d.com/appendix/a.1-updates-and-bug-fixes/version-1.3.2-build-190919.md)
- [Version 1.3.2 build 190731](https://manual.karamba3d.com/appendix/a.1-updates-and-bug-fixes/version-1.3.2-build-190731.md)
- [Version 1.3.2 build 190709](https://manual.karamba3d.com/appendix/a.1-updates-and-bug-fixes/version-1.3.2-build-190709.md)
- [Version 1.3.2](https://manual.karamba3d.com/appendix/a.1-updates-and-bug-fixes/a.3-whats-new-in-version-1.3.2.-with-respect-to-version-1.3.1.md)
- [A.2: Background information](https://manual.karamba3d.com/appendix/a.4-background-information.md)
- [A.2.1: Basic Properties of Materials](https://manual.karamba3d.com/appendix/a.4-background-information/a.4.1-basic-properties-of-materials.md)
- [A.2.2: Additional Information on Loads](https://manual.karamba3d.com/appendix/a.4-background-information/a.4.2-additional-information-on-loads.md)
- [A.2.3: Tips for Designing Statically Feasible Structures](https://manual.karamba3d.com/appendix/a.4-background-information/a.4.3-tips-for-designing-statically-feasible-structures.md)
- [A.2.4: Performance Optimization in Karamba3D](https://manual.karamba3d.com/appendix/a.4-background-information/a.4.4-hints-on-reducing-computation-time.md)
- [A.2.5: Natural Vibrations, Eigen Modes and Buckling](https://manual.karamba3d.com/appendix/a.4-background-information/a.4.5-natural-vibrations-eigen-modes-and-buckling.md)
- [A.2.6: Approach Used for Cross Section Optimization](https://manual.karamba3d.com/appendix/a.4-background-information/a.4.6-approach-used-for-cross-section-optimization.md)
- [A.3: Workflow Examples](https://manual.karamba3d.com/appendix/a.3-workflow-examples.md)
- [A.4: Bibliography](https://manual.karamba3d.com/appendix/bibliography.md)

## English V3 Beta

- [Welcome to Karamba3D Beta](https://manual.karamba3d.com/beta/readme.md): The official guide to using Karamba3D v3. The latest version is 3.1.4.
- [New in Karamba3D 3.1 Beta](https://manual.karamba3d.com/beta/new-in-karamba3d-3.1.md)
- [1.1 Installation](https://manual.karamba3d.com/beta/1-introduction/a.2-installation.md)
- [1.2 Licenses](https://manual.karamba3d.com/beta/1-introduction/1.2-licenses.md)
- [1.2.1 Cloud Licenses](https://manual.karamba3d.com/beta/1-introduction/1.2-licenses/1.2.1-cloud-licenses.md)
- [1.2.2 Network Licenses](https://manual.karamba3d.com/beta/1-introduction/1.2-licenses/1.2.2-network-licenses.md)
- [1.2.3 Temporary Licenses](https://manual.karamba3d.com/beta/1-introduction/1.2-licenses/1.2.3-temporary-licenses.md)
- [1.2.4 Standalone Licenses](https://manual.karamba3d.com/beta/1-introduction/1.2-licenses/1.2.4-standalone-licenses.md)
- [2 Getting Started](https://manual.karamba3d.com/beta/2-getting-started/2-getting-started-1.md)
- [2.1 Karamba3D Entities](https://manual.karamba3d.com/beta/2-getting-started/2-getting-started-1/karamba3d-entities.md)
- [2.2 Setting up a Structural Analysis](https://manual.karamba3d.com/beta/2-getting-started/2-getting-started-1/setting-up-a-structural-analysis.md)
- [2.2.1 Define the Model Elements](https://manual.karamba3d.com/beta/2-getting-started/2-getting-started-1/setting-up-a-structural-analysis/2.2.1-define-the-model-elements.md)
- [2.2.2 View the Model](https://manual.karamba3d.com/beta/2-getting-started/2-getting-started-1/setting-up-a-structural-analysis/2.2.2-view-the-model.md)
- [2.2.3 Add Supports](https://manual.karamba3d.com/beta/2-getting-started/2-getting-started-1/setting-up-a-structural-analysis/2.2.3-add-supports.md)
- [2.2.4 Define Loads](https://manual.karamba3d.com/beta/2-getting-started/2-getting-started-1/setting-up-a-structural-analysis/2.2.4-define-loads.md)
- [2.2.5 Choose an Algorithm](https://manual.karamba3d.com/beta/2-getting-started/2-getting-started-1/setting-up-a-structural-analysis/2.2.5-choose-an-algorithm.md)
- [2.2.6 Provide Cross Sections](https://manual.karamba3d.com/beta/2-getting-started/2-getting-started-1/setting-up-a-structural-analysis/2.2.6-provide-cross-sections.md)
- [2.2.7 Specify Materials](https://manual.karamba3d.com/beta/2-getting-started/2-getting-started-1/setting-up-a-structural-analysis/2.2.7-specify-materials.md)
- [2.2.8 Retrieve Results](https://manual.karamba3d.com/beta/2-getting-started/2-getting-started-1/setting-up-a-structural-analysis/2.2.8-retrieve-results.md)
- [2.3 The Karamba3D Menu](https://manual.karamba3d.com/beta/2-getting-started/2-getting-started-1/2.3-the-karamba3d-menu.md)
- [2.4 User Settings](https://manual.karamba3d.com/beta/2-getting-started/2-getting-started-1/2.4-user-settings.md)
- [2.5 Physical Units](https://manual.karamba3d.com/beta/2-getting-started/2-getting-started-1/2.3-physical-units.md)
- [2.6 Asynchronous Execution of Karamba3D Components](https://manual.karamba3d.com/beta/2-getting-started/2-getting-started-1/2.6-asynchronous-execution-of-karamba3d-components.md)
- [2.7 Naming and Selection of Elements](https://manual.karamba3d.com/beta/2-getting-started/2-getting-started-1/2.7-naming-and-selection-of-elements.md)
- [2.8 Quick Component Reference](https://manual.karamba3d.com/beta/2-getting-started/2-getting-started-1/untitled.md)
- [3.0 Settings](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.0-settings.md)
- [3.0.1 License](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.0-settings/3.0.2-license.md)
- [3.1 Model](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.1-model.md)
- [3.1.1 Assemble Model](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.1-model/3.1.1-assemble-model.md)
- [3.1.2 Disassemble Model](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.1-model/3.1.2-disassemble-model.md)
- [3.1.3: Modify Model](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.1-model/3.1.3-modify-model.md)
- [3.1.4: Connected Parts](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.1-model/3.1.4-connected-parts.md)
- [3.1.5: Activate Element](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.1-model/3.1.5-activate-element.md)
- [3.1.6 Create Linear Element](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.1-model/3.1.6-create-linear-element.md)
- [3.1.6.1 Line to Beam](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.1-model/3.1.6-create-linear-element/3.1.6-line-to-beam.md)
- [3.1.6.2 Line to Truss](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.1-model/3.1.6-create-linear-element/3.1.6-line-to-beam-1.md)
- [3.1.6.3 Connectivity to Beam](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.1-model/3.1.6-create-linear-element/3.1.7-connectivity-to-beam.md)
- [3.1.6.4: Index to Beam](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.1-model/3.1.6-create-linear-element/3.1.8-index-to-beam.md)
- [3.1.7 Create Surface Element](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.1-model/3.1.7-create-surface-element.md)
- [3.1.7.1: Mesh to Shell](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.1-model/3.1.7-create-surface-element/3.1.9-mesh-to-shell.md)
- [3.1.7.2: Mesh to Membrane](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.1-model/3.1.7-create-surface-element/3.1.7.2-mesh-to-membrane.md)
- [3.1.8: Modify Element](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.1-model/3.1.10-modify-element.md)
- [3.1.9: Point-Mass](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.1-model/3.1.11-point-mass.md)
- [3.1.10: Disassemble Element](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.1-model/3.1.12-disassemble-element.md)
- [3.1.11: Make Element-Set](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.1-model/3.1.13-make-beam-set.md)
- [3.1.12: Orientate Element](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.1-model/3.1.14-orientate-element.md)
- [3.1.13: Dispatch Elements](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.1-model/3.1.15-select-beam.md)
- [3.1.14: Select Elements](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.1-model/3.1.16-select-elements.md)
- [3.1.15: Support](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.1-model/3.1.16-support.md)
- [3.1.16: Support Agent](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.1-model/3.1.16-support-agent.md)
- [3.1.17: Disassemble Support](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.1-model/3.1.17-disassemble-support.md)
- [3.2: Load](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.2-load.md)
- [3.2.1: General Loads](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.2-load/3.2.1-loads.md)
- [3.2.2: Beam Loads](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.2-load/3.2.2-beam-loads.md)
- [3.2.3: Disassemble Mesh Load](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.2-load/3.2.2-disassemble-mesh-load.md)
- [3.2.4 Load-Case-Combinations](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.2-load/3.2.5-load-case-combinations.md)
- [3.2.5.1 Load-Case-Combinator](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.2-load/3.2.5-load-case-combinations/3.2.5.1-load-case-combinator.md)
- [3.2.5.2 Disassemble Load-Case-Combinaton](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.2-load/3.2.5-load-case-combinations/3.2.5.2-disassemble-load-case-combinaton.md)
- [3.2.5.3 Load-Case-Combination Settings](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.2-load/3.2.5-load-case-combinations/3.2.5.3-load-case-combination-settings.md)
- [3.2.5.4 Load-Case Properties](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.2-load/3.2.5-load-case-combinations/3.2.5.4-load-case-properties.md)
- [3.3: Cross Section](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.3-cross-section.md)
- [3.3.1: Beam Cross Sections](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.3-cross-section/3.3.1-beam-cross-sections.md)
- [3.3.2: Shell Cross Sections](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.3-cross-section/3.3.2-shell-cross-sections.md)
- [3.3.3: Spring Cross Sections](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.3-cross-section/3.3.3-spring-cross-sections.md)
- [3.3.4: Disassemble Cross Section](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.3-cross-section/3.3.4-disassemble-cross-section.md)
- [3.3.5: Eccentricity on Beam and Cross Section](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.3-cross-section/3.3.7-eccentricity-on-beam-eccentricity-on-cross-section.md)
- [3.3.6: Modify Cross Section](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.3-cross-section/3.3.8-modify-cross-section.md)
- [3.3.7: Cross Section Range Selector](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.3-cross-section/3.3.9-cross-section-range-selector.md)
- [3.3.8: Cross Section Selector](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.3-cross-section/3.3.10-cross-section-selector.md)
- [3.3.9: Cross Section Matcher](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.3-cross-section/3.3.11-cross-section-matcher.md)
- [3.3.10: Generate Cross Section Table](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.3-cross-section/3.3.12-generate-cross-section-table.md)
- [3.3.11: Read Cross Section Table from File](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.3-cross-section/3.3.13-read-cross-section-table-from-file.md)
- [3.3.12 Cross-Section Checkers](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.3-cross-section/3.3.12-cross-section-checkers.md)
- [3.3.12.1 Checkers for any Material](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.3-cross-section/3.3.12-cross-section-checkers/3.3.12.1-checkers-for-any-material.md)
- [3.3.12.2 Steel Checkers](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.3-cross-section/3.3.12-cross-section-checkers/3.3.12.2-steel-checkers.md)
- [3.3.12.3 How to write your own Checkers](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.3-cross-section/3.3.12-cross-section-checkers/3.3.12.3-how-to-write-your-own-checkers.md)
- [3.4: Joint](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.4-joint.md)
- [3.4.1: Beam-Joints](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.4-joint/3.3.6-beam-joints.md)
- [3.4.2: Beam-Joint Agent](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.4-joint/3.3.5-beam-joint-agent.md)
- [3.4.3: Line-Joint](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.4-joint/3.4.3-line-joint.md)
- [3.5: Material](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.4-material.md)
- [3.5.1: Material Properties](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.4-material/3.4.1-material-properties.md)
- [3.5.2: Material Selection](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.4-material/3.4.2-material-selection.md)
- [3.5.3: Read Material Table from File](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.4-material/3.4.3-read-material-table-from-file.md)
- [3.5.4: Disassemble Material](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.4-material/3.4.4-disassemble-material.md)
- [3.6: Algorithms](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.5-algorithms.md)
- [3.6.1: Analyze](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.5-algorithms/3.5.1-analyze.md)
- [3.6.2: AnalyzeThII](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.5-algorithms/3.5.2-analyzethii.md)
- [3.6.3: Analyze Nonlinear WIP](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.5-algorithms/3.5.3-analyze-nonlinear-wip.md)
- [3.6.4: Large Deformation Analysis](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.5-algorithms/3.5.4-analyze-large-deformation.md)
- [3.6.5: Buckling Modes](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.5-algorithms/3.5.5-buckling-modes.md)
- [3.6.6: Eigen Modes](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.5-algorithms/3.5.6-eigen-modes.md)
- [3.6.7: Natural Vibrations](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.5-algorithms/3.5.7-natural-vibrations.md)
- [3.6.8: Optimize Cross Section](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.5-algorithms/3.5.8-optimize-cross-section.md)
- [3.6.9: BESO for Beams](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.5-algorithms/3.5.9-beso-for-beams.md)
- [3.6.10: BESO for Shells](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.5-algorithms/3.5.10-beso-for-shells.md)
- [3.6.11: Optimize Reinforcement](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.5-algorithms/3.5.11-optimize-reinforcement.md)
- [3.6.12: Tension/Compression Eliminator](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.5-algorithms/3.5.12-tension-compression-eliminator.md): This component was programmed by Robert Vierlinger
- [3.7 Results](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.6-results.md)
- [3.7.1 General Results](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.6-results/3.7.1-general-results.md)
- [3.7.1.1 ModelView](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.6-results/3.7.1-general-results/3.6.1-modelview.md)
- [3.7.1.2 Result Selector](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.6-results/3.7.1-general-results/3.7.1.2-result-selector.md)
- [3.7.1.3 Deformation-Energy](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.6-results/3.7.1-general-results/3.6.2-deformation-energy.md)
- [3.7.1.4 Element Query](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.6-results/3.7.1-general-results/3.7.3-element-query.md)
- [3.7.1.5 Nodal Displacements](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.6-results/3.7.1-general-results/3.6.3-nodal-displacements.md)
- [3.7.1.6 Principal Strains Approximation](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.6-results/3.7.1-general-results/3.6.4-principal-strains-approximation.md)
- [3.7.1.7 Reaction Forces](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.6-results/3.7.1-general-results/3.6.5-reaction-forces.md)
- [3.7.1.8 Utilization of Elements](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.6-results/3.7.1-general-results/3.6.6-utilization-of-elements.md)
- [3.7.1.9 ReactionView](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.6-results/3.7.1-general-results/3.7.1.9-reactionview.md)
- [3.7.2 Results on Beams](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.6-results/3.7.2-results-on-beams.md)
- [3.7.2.1 BeamView](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.6-results/3.7.2-results-on-beams/3.6.7-beamview.md)
- [3.7.2.2 Beam Displacements](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.6-results/3.7.2-results-on-beams/3.6.8-beam-displacements.md)
- [3.7.2.3 Beam Forces](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.6-results/3.7.2-results-on-beams/3.6.9-beam-forces.md)
- [3.7.2.4 Node Forces](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.6-results/3.7.2-results-on-beams/3.6.10-resultant-section-forces.md)
- [3.7.3 Results on Shells](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.6-results/3.7.3-results-on-shells.md)
- [3.7.3.1 ShellView](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.6-results/3.7.3-results-on-shells/3.6.11-shellview.md)
- [3.7.3.2 Line Results on Shells](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.6-results/3.7.3-results-on-shells/3.6.12-line-results-on-shells.md)
- [3.7.3.3 Result Vectors on Shells](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.6-results/3.7.3-results-on-shells/3.6.13-result-vectors-on-shells.md)
- [3.7.3.4 Shell Forces](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.6-results/3.7.3-results-on-shells/3.6.14-shell-forces.md)
- [3.7.3.5 Shell Sections](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.6-results/3.7.3-results-on-shells/3.6.15-shell-sections.md): The 'Shell-Section'-component lets you determine forces, stresses and displacements of a shell along arbitrary poly-lines.
- [3.7.4 Report](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.6-results/3.7.4-report.md)
- [3.8 Export](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.7-export.md)
- [3.8.1 Export Model to DStV](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.7-export/3.7.1-export-model-to-dstv.md)
- [3.8.2 Json/Bson Export and Import](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.7-export/3.8.2-json-bson-export-and-import.md)
- [3.8.3 Export Model to SAF](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.7-export/3.8.3-export-model-to-saf.md)
- [3.8.4 Export/Import Model to and from Speckle (WIP)](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.7-export/3.8.4-export-import-model-to-and-from-speckle-wip.md)
- [3.8.5 Export Model to ETABS (.e2k)](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.7-export/3.8.5-export-model-to-etabs-.e2k.md)
- [3.8.6 Export Model to SAP2000 (.s2k)](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.7-export/3.8.6-export-model-to-sap2000-.s2k.md)
- [3.9 Utilities](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.8-utilities.md)
- [3.9.1: Mesh Breps](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.8-utilities/3.8.1-mesh-breps.md): This component was programmed by Moritz Heimrath
- [3.9.2: Closest Points](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.8-utilities/3.8.2-closest-points.md)
- [3.9.3: Closest Points Multi-dimensional](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.8-utilities/3.8.3-closest-points-multi-dimensional.md)
- [3.9.4: Cull Curves](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.8-utilities/3.8.4-cull-curves.md)
- [3.9.5: Detect Collisions](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.8-utilities/3.8.5-detect-collisions.md)
- [3.9.6: Get Cells from Lines](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.8-utilities/3.8.6-get-cells-from-lines.md)
- [3.9.7: Curve-Curve Intersection](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.8-utilities/3.8.7-line-line-intersection.md)
- [3.9.8: Principal States Transformation](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.8-utilities/3.8.8-principal-states-transformation.md)
- [3.9.9: Remove Duplicate Lines](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.8-utilities/3.8.9-remove-duplicate-lines.md)
- [3.9.10: Remove Duplicate Points](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.8-utilities/3.8.10-remove-duplicate-points.md)
- [3.9.11: Simplify Model](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.8-utilities/3.8.11-simplify-model.md)
- [3.9.12: Element Felting](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.8-utilities/3.8.12-element-felting.md)
- [3.9.13: Mapper](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.8-utilities/3.8.13-mapper.md)
- [3.9.14: Interpolate Shape](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.8-utilities/3.8.14-interpolate-shape.md)
- [3.9.15: Connecting Beams with Stitches](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.8-utilities/3.8.15-connecting-beams-with-stitches.md)
- [3.9.16: User Iso-Lines and Stream-Lines](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.8-utilities/3.8.16-user-iso-lines-and-stream-lines.md)
- [3.9.17: Cross Section Properties](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.8-utilities/3.9.17-cross-section-properties.md)
- [3.9.18 Surface To Truss](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.8-utilities/3.9.18-surface-to-truss.md)
- [3.9.19 Head-Up Display Legend](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.8-utilities/3.9.19-head-up-display-legend.md)
- [3.9.20 Key Listener](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.8-utilities/3.9.20-key-listener.md)
- [3.10 Parametric UI](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.9-parametric-ui.md)
- [3.10.1: View-Components](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.9-parametric-ui/3.9.1-view-components.md)
- [3.10.2: Rendered View](https://manual.karamba3d.com/beta/3-in-depth-component-reference/3.9-parametric-ui/render-symbols.md)
- [4.1: Miscellaneous Questions and Problems](https://manual.karamba3d.com/beta/troubleshooting/4.3.-miscellaneous-problems.md)
- [4.1.0: FAQ](https://manual.karamba3d.com/beta/troubleshooting/4.3.-miscellaneous-problems/4.1.0-faq.md)
- [4.1.1: Installation Issues](https://manual.karamba3d.com/beta/troubleshooting/4.3.-miscellaneous-problems/4.3.1-installation-issues.md)
- [4.1.2: Purchases](https://manual.karamba3d.com/beta/troubleshooting/4.3.-miscellaneous-problems/4.1.2-purchases.md)
- [4.1.3: Licensing](https://manual.karamba3d.com/beta/troubleshooting/4.3.-miscellaneous-problems/licensing.md)
- [4.1.4: Runtime Errors](https://manual.karamba3d.com/beta/troubleshooting/4.3.-miscellaneous-problems/4.1.4-runtime-errors.md)
- [4.1.5: Definitions and Components](https://manual.karamba3d.com/beta/troubleshooting/4.3.-miscellaneous-problems/4.1.5-definitions-and-components.md)
- [4.1.6: Default Program Settings](https://manual.karamba3d.com/beta/troubleshooting/4.3.-miscellaneous-problems/4.1.6-changing-karamba.ini-file.md)
- [4.2: Support](https://manual.karamba3d.com/beta/troubleshooting/4.2-karamba3d-does-not-work-for-unknown-reason.md)
- [A.1: Release Notes](https://manual.karamba3d.com/beta/appendix/a.1-updates-and-bug-fixes.md)
- [Work in Progress Versions](https://manual.karamba3d.com/beta/appendix/a.1-updates-and-bug-fixes/work-in-progress-versions.md)
- [Older Versions](https://manual.karamba3d.com/beta/appendix/a.1-updates-and-bug-fixes/older-versions.md)
- [Version 2.2.0](https://manual.karamba3d.com/beta/appendix/a.1-updates-and-bug-fixes/new-in-karamba3d-2.2.0.x.md)
- [Version 2.2.0 WIP](https://manual.karamba3d.com/beta/appendix/a.1-updates-and-bug-fixes/version-2.2.0-wip.md)
- [Version 1.3.3](https://manual.karamba3d.com/beta/appendix/a.1-updates-and-bug-fixes/version-1.3.3.md)
- [Version 1.3.2 build 190919](https://manual.karamba3d.com/beta/appendix/a.1-updates-and-bug-fixes/version-1.3.2-build-190919.md)
- [Version 1.3.2 build 190731](https://manual.karamba3d.com/beta/appendix/a.1-updates-and-bug-fixes/version-1.3.2-build-190731.md)
- [Version 1.3.2 build 190709](https://manual.karamba3d.com/beta/appendix/a.1-updates-and-bug-fixes/version-1.3.2-build-190709.md)
- [Version 1.3.2](https://manual.karamba3d.com/beta/appendix/a.1-updates-and-bug-fixes/a.3-whats-new-in-version-1.3.2.-with-respect-to-version-1.3.1.md)
- [A.2: Background information](https://manual.karamba3d.com/beta/appendix/a.4-background-information.md)
- [A.2.1: Basic Properties of Materials](https://manual.karamba3d.com/beta/appendix/a.4-background-information/a.4.1-basic-properties-of-materials.md)
- [A.2.2: Additional Information on Loads](https://manual.karamba3d.com/beta/appendix/a.4-background-information/a.4.2-additional-information-on-loads.md)
- [A.2.3: Tips for Designing Statically Feasible Structures](https://manual.karamba3d.com/beta/appendix/a.4-background-information/a.4.3-tips-for-designing-statically-feasible-structures.md)
- [A.2.4: Performance Optimization in Karamba3D](https://manual.karamba3d.com/beta/appendix/a.4-background-information/a.4.4-hints-on-reducing-computation-time.md)
- [A.2.5: Natural Vibrations, Eigen Modes and Buckling](https://manual.karamba3d.com/beta/appendix/a.4-background-information/a.4.5-natural-vibrations-eigen-modes-and-buckling.md)
- [A.2.6: Approach Used for Cross Section Optimization](https://manual.karamba3d.com/beta/appendix/a.4-background-information/a.4.6-approach-used-for-cross-section-optimization.md)
- [A.3: Workflow Examples](https://manual.karamba3d.com/beta/appendix/a.3-workflow-examples.md)
- [A.4: Bibliography](https://manual.karamba3d.com/beta/appendix/bibliography.md)